Warehouse Safety Tips | Episode 24 | Outsmarting Issues
Season 1, Episode 24, Jun 01, 2020, 11:28 AM
Outsmarting Issues
On today's Podcast - we're going to be covering PPE and why it should be covering you. So stay tuned...
Welcome to Warehouse Safety Tips!
On today's Podcast - we're going to be covering PPE and why it should be covering you. So stay tuned...
Welcome to Warehouse Safety Tips!
You can find the show notes to each episode, links to the information mentioned on the podcast, the social media platforms we're on, and anything else related to the podcast at WarehouseSafetyTips.com.
If you're a seasoned Podcast Listener - this podcast is going to be different from most you listen to. It's based around exactly what the name implies - Warehouse Safety Tips. And since the people in that industry are busy - we know time is money, so each episode will be as short and to the point as possible.
And now that all that is out of the way - let's get to the Podcast!
And now that all that is out of the way - let's get to the Podcast!
If you or someone you know were in the military - you've probably been present to several stories about Drill Instructors and the things they did during boot camp.
This is one of those stories.
During boot camp, recruits have to keep their belongings and personal area in an absolutely specific way. If they waiver from this - it's brought to the attention of everyone. Depending on the Drill Instructor and/or several other factors - the person directly responsible will be punished or they might punish the entire squad.
While doing an inspection - a Drill Instructor found a Foot Locker with its lock unlocked. He reprimanded the recruit for leaving it unlocked and then proceeded to tell the entire squad why he was doing so. Stealing from another recruit was absolutely forbidden - but leaving a Foot Locker unlocked welcomed the opportunity.
Before moving on - here's a word from one of our sponsors.
If you've ever been to or worked in a warehouse - you know just how important safety is to both management and staff. It's almost impossible to go 10 steps without seeing Safety Tape, Angles, Signs, and/or products.
It's these items that show us how to be safe and avoid danger in the workplace. And if you're looking for the best products to make this happen - look no further than Mighty Line!
Mighty Line Floor Signs / Floor Markings offer the best industrial products out there!
Go to MightyLineTape.com/SafetyTips to request a Sample Pack of their incredible Safety Signs and Floor Markings.
What makes Mighty Line the superior choice in keeping your facility safe and productive?
- Mighty Line Tape is the strongest floor tape on the market and has a beveled edge that increases durability for industrial brush scrubbers, forklifts, and heavy industrial wheel traffic.
- Easy installation and removal thanks to Mighty Line's peel and stick backing. You can apply and reapply it during installation - and it leaves no sticky residue should you need to remove it. This allows the ability to change workflow areas quickly and easily - and not have the downtime associated with painting or using floor markings that leave behind a mess when you remove them.
- Mighty Line Tape is 7 times thicker than the average Safety Floor Tape.
- Mighty Line's Signs and Marking come in a variety of shapes, colors, and sizes. And if they don't have what you're looking for in stock - their Customize It Program allows you to create exactly what you're looking for.
- Mighty Line offers a Limited 3-Year Warranty on their Floor Signs and Markings.
- And last but certainly not least - Mighty Line Products are Patented and PROUDLY Made in the USA!
We're proud to have Mighty Line as THE Official Floor Sign / Floor Marking Company for the Warehouse Safety Tips Podcast and Site.
Again - Go to MightyLineTape.com/SafetyTips to request a Sample Pack of their incredible Safety Signs and Floor Markings.
Now back to the Podcast...
Chances are, your facility isn't run like a platoon in Boot Camp. And although you might FEEL as if they're super tough, it's also likely your management don't behave like Drill Instructors.
Chances are, your facility isn't run like a platoon in Boot Camp. And although you might FEEL as if they're super tough, it's also likely your management don't behave like Drill Instructors.
What IS similar to the above-mentioned story is preventing issues/accidents BEFORE they're able to happen.
So how do we do it? By implementation of The 5S Methodology.
Sometimes we single out a specific "S" - but in the case of prevention, the entire 5S Methodology is applicable. We've gone over them in previous Podcasts - but here's a quick review.
Sort (Seiri): This step is where you sort and categorize items - and separate what is needed – allowing only the bare essentials needed for operation and removing everything else. The elimination of excessive items frees up space, saves time, improves process flow, and allows staff to operate efficiently.
Next, we have -
Straighten or Set in Order (Seiton): This step is arranging items that are needed so that they are easy to locate, transport, use, identify locations for all items so that anyone can find them. Once the task is completed, return the items to specified locations. Issues in the workplace aren't always associated with accidents. Loss of time compounded by time can cost a facility dearly. So assuring staff has everything they need when they need it - saves time and money.
After that, we come to -
Shine (Seiso): Clean the workplace and equipment on a regular basis in order to increase safety, maintain standards, and identify defects.
Standardize (Seiketsu): Revisit the first three of the 5S on a regular and frequent basis and evaluate the condition of the workplace.
Now over the years, there has been an additional S added to the mix - which actually makes the 5S Methodology - 6S Methodology, and that's -
Safety: The addition of SAFETY means you should constantly be looking around your facility to identify issues that can or could possibly affect your staff, production, service, and/or your overall facility - and work to eliminate those issues.
And what in the past would have been the 5th S - but is now the 6th is -
Sustain (Shitsuke): Maintain the standard and improve every day. This S allows you to strive for continuous improvement!
Sort (Seiri): This step is where you sort and categorize items - and separate what is needed – allowing only the bare essentials needed for operation and removing everything else. The elimination of excessive items frees up space, saves time, improves process flow, and allows staff to operate efficiently.
Next, we have -
Straighten or Set in Order (Seiton): This step is arranging items that are needed so that they are easy to locate, transport, use, identify locations for all items so that anyone can find them. Once the task is completed, return the items to specified locations. Issues in the workplace aren't always associated with accidents. Loss of time compounded by time can cost a facility dearly. So assuring staff has everything they need when they need it - saves time and money.
After that, we come to -
Shine (Seiso): Clean the workplace and equipment on a regular basis in order to increase safety, maintain standards, and identify defects.
Standardize (Seiketsu): Revisit the first three of the 5S on a regular and frequent basis and evaluate the condition of the workplace.
Now over the years, there has been an additional S added to the mix - which actually makes the 5S Methodology - 6S Methodology, and that's -
Safety: The addition of SAFETY means you should constantly be looking around your facility to identify issues that can or could possibly affect your staff, production, service, and/or your overall facility - and work to eliminate those issues.
And what in the past would have been the 5th S - but is now the 6th is -
Sustain (Shitsuke): Maintain the standard and improve every day. This S allows you to strive for continuous improvement!
Implement these "S's" EVERY chance you get - and you'll increase your chances of stopping issues BEFORE they happen!
If you visit WarehouseSafetyTips.com - you'll find the Show Notes for this episode.
Thank you for listening to Warehouse Safety Tips - and have a SAFE day!